Battery Projectile Test Method

Battery Projectile Tester and  Battery Projectile Test method

The Battery Projectile Test device is used for automotive lithium primary batteries and other primary batteries, as well as lithium-ion batteries, nickel-metal hydride, nickel-cadmium, and lithium iron phosphate batteries or power lithium battery modules. .

Battery Projectile test method

After the battery is fully charged according to the specified test method, the battery is placed on the steel wire mesh of the test tool. If the battery slips during the test, a single metal wire can be used to fix the battery sample on the steel wire mesh; If this happens, the battery cannot be bundled. Use a flame to heat the battery, and stop heating when the following three conditions occur: a) The battery explodes; b) The battery is completely burnt; c) Continue heating for 30 minutes, but the battery did not catch fire or explode. After the test, the parts that make up the battery (except dusty products) or the battery as a whole must not penetrate the aluminum mesh.