Test standards that the battery low-pressure high-altitude simulation test machine meets

November 10, 2021

Latest company news about Test standards that the battery low-pressure high-altitude simulation test machine meets

Test standards that the battery low-pressure high-altitude simulation test machine meets


Product description


This equipment is used for battery high-altitude and low-pressure (high altitude) simulation tests. The tested batteries are tested under a negative pressure of 11.6kPa (1.68psi) for 6 hours. The tested batteries must not explode, fire, smoke, or leak. Is qualified. The equipment can automatically control the test cycle (for example, 6H), monitor the air pressure changes in the box throughout the process, and realize the automatic termination of the test.


fulfill the standard:


GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
GB/T 18287 -2013 "General Specification for Lithium Ion Batteries for Cellular Phones" External short circuit requirements
GB/T 8897.6-2008 "Primary Batteries Part 6 Safety Requirements for Lithium Batteries"
YD/T 2366.1-2011 "Lithium iron phosphate battery pack for communication-Part 1: Integrated battery"
GB/T 21966-2008 "Safety requirements for lithium primary batteries and accumulators in transportation"
MT/T 1051-2007 "Lithium ion battery for miner's lamp"
YD 1268-2003 "Safety requirements and test methods for lithium batteries and chargers for mobile communication handsets"
GB/T 19521.11-2005 "Safety Code for Inspection of Dangerous Characteristics of Dangerous Goods of Lithium Battery Packs"
YDB 032-2009 "Back-up Li-ion Battery Pack for Communication"
UL 1642:2012 "Lithium Battery Standard (Safety)"
UL 2054: 2012 "Safety Standard (Lithium Battery)"
UN38.3(2012) "Recommendation on the Transport of Dangerous Goods-Part III of the Manual of Tests and Standards"
IEC62133-2-2017 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"
IEC 62281: 2006 "Safety requirements for lithium primary batteries and accumulators in transportation"
IEC 60086: 2007 "Primary Batteries Part 6 Safety Requirements for Lithium Batteries"